UTILEV
1.2 Model designation UT25P UT30P
1.3 Power LPG Dual Fuel LPG Dual Fuel
1.4 Operation Seat Seat
1.5 Load capacity Q lb (kg) 5000 (2268) 6000 (2722)
1.6 Load center c in (mm) 24 (610) 24 (610)
1.8 Load distance x in (mm) 18.7 (475) 19.7 (500)
1.9 Wheelbase y in (mm) 65 (1650) 69.3 (1760)
Weight2.1 Unladen weight lb (kg) 8300 (3765) 9381 (4255)
2.2 Axle loading with load front/rear lb (kg) 12191 (5530)/1620 (735) 14286 (6480)/1664 (755)
2.3 Axle loading without load, front/rear lb (kg) 3439 (1560)/4861 (2205) 3891 (1765)/5489 (2490)
Wheels and Tires3.1 Tire Type Pneumatic Pneumatic
3.2 Tire size-front 7.00-12-12PR 28x9-15-12PR
3.3 Tire size-rear 6.00-9-10PR 6.50-10-10PR
3.5 Number of wheels, front/rear (X = driven) 2X/2 2X/2
3.6 Track width, front b10 in (mm) 38.0 (965) 39.6 (1005)
3.7 Track width, rear b11 in (mm) 38.2 (970.5) 38.3 (973.5)
Dimensions 4.1 Mast tilt, forward (a) /back (b) degrees 6 / 6 6 / 6
4.2 Height of mast, lowered h1 in (mm) 87 (2210) 89 (2260)
4.3 Free lift ( top of fork) h2 in (mm) 60 (1528) 60 (1525)
4.4 Lift height (top of fork) h3 in (mm) 188 (4800) 188 (4800)
4.5 Height of mast, extended ( WITH LBR ) h4 in (mm) 231 (5855) 235 (5945)
4.7 Height to top of overhead guard OR cab h6 in (mm) 87 (2200) 88 (2230)
4.8 Seat height h7 in (mm) 40.4 (1025) 41.5 (1055)
4.12 Towing coupling height h10 in (mm) 12.6 (320) 13.8 (350)
4.19 Overall length l1 in (mm) 144.5 (3670) 150.4 (3820)
4.20 Length to face of forks l2 in (mm) 102.4 (2600) 108.3 (2750)
4.21 Overall width b1 in (mm) 45.5 (1155) 48.2 (1225)
4.22 Fork dimensions s/e/l in (mm) 1.6 x 4.8 x 42 (40/122/1070) 1.8 x 4.8 x 42 (50/122/1070)
4.24 Fork carriage width (add 1.25” (32mm) for std. LBR) b3 in (mm) 44 (1118) 47.5 (1200)
4.31 Ground clearance under mast, with rated load m1 in (mm) 3.5 (90) 4.3 (110)
4.32 Ground clearance at center of wheelbase m2 in (mm) 5.3 (135) 6.5 (165)
4.33b Aisle width (add load length) with
7.9" (200mm) clearance Ast in (mm) 114.4 (2905) 120.3 (3055)
4.35 Outer turning radius Wa in (mm) 88.0 (2235) 93.5 (2375)
4.36 Inner turning radius b13 in (mm) 7.5 (190) 7.9 (200)
Performance 5.1 Travel speed with/without rated load MPH (km/h) 12.4 (20) / 13.0 (21) 11.2 (18) / 11.8 (19)
5.2 Lifting speed with/without rated load ft/min (m/sec) 110 (.56) / 114 (.58) 91 (.46) / 98 (.50)
5.3 Lowering speed with/without rated load ft/min (m/sec) 98 (.50) / .94 (.48) 98 (.50) / 89 (.45)
5.5 Drawbar pull with/without load @ 1 mph lb (kN) 3822 (17) / 2405 (10.7) 4496 (20) / 2720 (12.1)
5.6 Maximum drawbar pull with/without load, lb (kN) 4496 (20) / 2405 (10.7) 5171 (23) / 2720 (12.1)
5.7 Gradeability with/without load, @ 1 mph % 25 / 26 25 / 26
5.10 Service brake Hydraulic Hydraulic
Engine 7.1 Engine manufacturer/type PSI 2.4L PSI 2.4L
7.2 Engine output, in accordance with ISO1585 hp (kW) 63 (47.1) 63 (47.1)
Torque ft lbs (N-m)@RPM 132 (179) @2000 rpm 132 (179) @2000 rpm
7.3 Governed speed RPM 2800 2800
7.4 Number of cylinders/displacement # / cc / CID 4 / 2351 / 143 4 / 2351 / 143
Other 8.1 Drive control Automatic Automatic
8.2 Working pressure for attachments PSI (bar) 2550 (175) 2550 (175)
8.3 Maximum oil flow for attachments Gal/min (l/min) 13.2 (50) 13.2 (50)
8.5 Towing coupling type Pin Pin
Hydraulic Tank - capacity (drain & refill) gal (l) 15.9 (60) 18.6 (70)
Fuel Tank - Capacity (Gasoline-Powered Units Only) gal (l) N/A 15.9 (60) N/A 18.6 (70)
Step Height (from ground to running board) in (mm) 17.3 (440) 17.9 (455)
Step Height (between intermediate steps
between running board and floor) in (mm) 8.3 (210) 8.3 (210)